The Different Services That Are Offered by a Paving Contractor
A paving contractor is an establishment that constructs raised paved surfaces like walkways, sidewalks, driveways, etc. Most paving companies specialise solely in commercial or residential work, although some can do both types depending upon the scope of their project and the available equipment. When paving a driveway, for instance, most paving contractors would prefer to use heavy equipment such as skid-steer trucks or large dump trucks to carry out the work. If they were to use wheeled vehicles, they would need to be insured, as most people will agree, and have liability cover for any eventualities. Any paving contractor will also take into account factors such as local building and planning regulations and local engineering guidelines before carrying out any paving work.
Parking lots are always the most difficult surfaces to pave, as they are large and open. It is important for a paving contractor to have the right equipment to ensure the job is carried out safely. A small mistake at this point could cause considerable damage, not only to the paving crew’s equipment but also to the pavement. Parking lot paving is carried out with skid-steers, and large trucks are used where the pavement is not flat. The contractor will first prepare the area to be paving, by removing any weeds and planting grasses in the space, then will decide what type of paving materials will be best to use, taking into consideration any previous landscaping plans and the size and shape of the area.
One of the most common choices made by a paving contractor when it comes to paving a parking lot is concrete, which can then be filled with epoxy resin. This is a faster drying concrete, which can be used for the whole length of a driveway, even though it does tend to wear more quickly than some other paving options. Once the concrete has been fixed into place, a waterproof sealant is applied to help the structure of the driveway stay in good condition. If you have a concrete driveway, you will need to remove the asphalt surface, and clean and repair any damaged sections. The contractor may choose to pour a mix of epoxy and concrete into the spot to start the work off, or even just using one single layer, which will then be topped up with another layer of waterproof resin.
Other paving contractors use other types of materials for their parking lots, including brick. Bricks can be laid in an array of styles, from circular to rectangular, depending on what the contractor needs. Brick is typically used as a base for decorative stones, tiles and plants, as it is quite hard and sturdy. Once this is done, it is time to apply a sealant to help protect the concrete from water damage. In many cases, stone or brick is laid over asphalt, which makes a walk on the surface of the lot easier and safer.
To finish the job, paving companies will often install a drainage system, too. This helps to keep water away from the paved area, so that it does not get to the foundation of the house or damage the structure. Most driveway systems are made out of copper or iron, and are very durable. They can also be painted with colors that help bring out the design of the house. This finishing process also helps to protect the base material, making it last longer and more efficient for future projects. When the driveway is finished, it looks like a brand new driveway, with no loose gravel or patchy spots.
Paving companies can offer many different kinds of services, depending on what is needed for a particular area. Some of them specialize in making large surfaces, while others may only do small jobs around the parking lot. An experienced paving contractor will take all of these needs into consideration and make sure to make the best possible job. After they finish a parking lot, they might go on to do another job on an asphalt surface, or even another driveway. It all depends on the business and the individual contractor, as to how many different projects they will be able to handle at once.